Epson Stylus Photo R1800 - Removing the Spacer and Rotating the Left Bushing 8; Removing the Left Bushing 8; Removing the Front Paper Guide and Paper Eject Rollers

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 117
5. Remove the Spacer from the EJ Roller Shaft.
6. Remove the Guide Pins on Left Bushing 8 from the Main Frame using
tweezers, and turn Left Bushing 8 toward you to align with the notches on
the Main Frame.
Figure 4-116. Removing the Spacer and Rotating the Left Bushing 8
7. Slide the Front Paper Eject Roller to the left, and remove the Left Bushing
8 from the Main Frame.
Figure 4-117. Removing the Left Bushing 8
8. Return the Carriage Unit to its home position.
9. Release the Tab that secures the Front Paper Guide from the Main Frame
and slide the Front Paper Guide to the left, and turn it until the front side
faces up to remove the Front Paper Guide together with the Paper Eject
Roller.
Figure 4-118. Removing the Front Paper Guide and Paper Eject Rollers
Insert the Spacer into the groove on the Front Paper Eject
Roller.
Guide
pin
Spacer
Left Bushing 8
Notch
Groove
Front Paper Eject Roller
Tab
Front Paper Eject
Roller
Front Paper
Guide
Rear Paper Eject
Roller