Epson Stylus Photo R1800 - Rotating the Left Bushing 8; Handling the PF Roller Shaft

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 120
8. Remove the Guide Pin of Left Bushing 8 from the Main Frame using
tweezers, and rotate the Bushing upwards to align with the notch on the
Main Frame.
Figure 4-125. Rotating the Left Bushing 8
9. Remove the E-ring from the PF Roller Shaft with a flat-blade screwdriver,
and slide Left Bushing 8 to the inside of the Printer Mechanism.
Figure 4-126. Removing the Left Bushing 8
C A U T I O N
When performing the following procedure, take care not to
lose the E-ring.
Left Bushing 8
Guide pin
Notch
E-Ring
PF Roller Shaft
C A U T I O N
When performing the following procedure, pay attention to
the following points.
 Prevent the coated surface of the PF Roller Shaft from
being scratched.
 Do not touch the coated surface of the PF Roller Shaft
with bare hands.
Figure 4-127. Handling the PF Roller Shaft
Coating Part