Epson Stylus Photo R1800 - Preparing the Calibration Chart; Starting the Color Measurement

EPSON Stylus Photo R1800/R2400 Revision B
Adjustment Adjustment 155
11. After confirming that you are within the color measurement time limit, place
the Calibration Chart sheet on a black paper, put the scanning ruler on the
Chart sheet, then click [OK].
Figure 5-36. Preparing the Calibration Chart
12. Follow the on-screen messages to measure the Chart. After the color
measurement is finished, click [OK].
Figure 5-37. Starting the Color Measurement
Color patch grid
Color measurement
"completed" rows
Patches in the completed rows are displayed in colors
created according to the measurement result.
Color measurement
"not completed" rows
Rows that have not been measured are displayed in pale
color.
Arrow Indicates the start position of color measuring.
Cursor Automatically moves up when color measurement of a
row is completed.
Scroll buttons Scroll the cursor up or down. (These buttons are
available for already measured rows or the row currently
being measured.)
This button is
enabled after color
measurement is
completed.