Epson Stylus Photo R1800 - Page 225

EPSON Stylus Photo R1800/R2400 Revision B
Stylus Photo R2400 Overview 225
At power-on At power-on, the PF Roller
rotates fast about a half turn.
PF Scale 1. Check that the PF Scale is inserted in the slit of the PF
Encoder Sensor.
1. Install the PF Scale in the slit of the PF
Encoder Sensor correctly.
2. Check the PF Scale for damages and dirt. 2. Replace the PF Scale with a new one.
During printing After receiving a print data, or
while performing the CD-R
Tray home position detection
sequence (Board Paper
detection), an error is
displayed on the LED and
EPW3.
Head FFC
Sensor FFC
1. Check that the Head FFC and the Sensor FFC are
securely connected to the Main Board Connectors CN9
through CN14.
1. Connect the Head FFC and the Sensor
FFC to the Main Board Connectors CN9
through CN14.
Table 8-16. Troubleshooting of Fatal Error
Occurrence
Timing
Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
Slit
PF Scale
CN9 through CN14