Epson Stylus Photo R1800 - Replacing an Ink Cartridge

EPSON Stylus Photo R1800/R2400 Revision B
Disassembly And Assembly Disassembly 80
4.2.2 Waste Ink Pad
1. Remove the Lower Housing. See Section 4.2.1.5 on page 78.
2. Remove the C.B.P. M3 x 8 screw that secures the Waste Ink Tube.
3. Remove the 15 Waste Ink Pads from the Lower Housing.
Figure 4-14. Removing the Waste Ink Pads
4) C.B.P. 3x8
(6±1 kgf.cm)
Waste Ink Pads
 Referring to Figure 4-15., correctly install the Waste Ink
Pads.
Figure 4-15. Reinstalling the Waste Ink Pads
1
2
3
4
1
2
3
4
Installation
Order
1
2
Installation
Order