Cleaning the Printer 53
Cleaning the Printer
To keep your printer working at its best, you should clean it several times a year.
1. Turn off the printer, unplug the power cord, and disconnect the USB cable.
2. Remove all the paper, then use a soft brush to clean the sheet feeder.
3. If the outer case or inside of the sheet feeder are dirty, clean them with a soft
cloth dampened with mild detergent. Keep the printer cover closed to prevent
water from getting inside.
4. If ink accidentally gets inside the printer, wipe it off with a damp cloth in the
area shown below.
Warning:
Don’t touch the gears or any other parts inside the printer.
Caution:
Never use a hard or abrasive brush, or benzine, alcohol, or paint thinner for
cleaning; they can damage the printer components and case.
Don’t get water on the printer components and don’t spray or apply lubricants, oils
or grease inside the printer.
Don’t use any cleaning sheets included with special paper; they may jam inside the
printer.
Clean here
To Next Page
Loading...
