Epson Stylus Photo R320 - 2.3.2 Removing Preview Monitor Unit

EPSON Stylus Photo R320 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly 39
2.3.2 Removing Preview Monitor Unit
 External View
Figure 2-3. Removing "Preview Monitor Unit"
 Parts/Units which should be removed before removing "Preview Monitor
Unit"
None
 Procedure for Removing
1. Raise the "Preview Monitor Unit".
2. Remove the screw(x1) which secure "Preview Monitor Unit".
3. Release the hook(x2) which secure "Preview Monitor Unit".
Then lift the "Preview Monitor Unit" upward.
4. Remove the "Monitor FFC" from the "Preview Monitor Board" connector.
Then remove "Preview Monitor Unit".
Preview Monitor Unit
C.B.P 3x8 (2-4kgf•cm)
Connector
Monitor FFC
Preview Monitor Board
Hooks