Epson Stylus Photo R320 - 2.3.20 Removing Paper Guide, Front;Roller EJ Assy.

EPSON Stylus Photo R320 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly 77
2.3.20 Removing Paper Guide, Front/Roller EJ Assy.
 External View
Figure 2-59. Removing "Paper Guide, Front"/"Roller EJ Assy." (1)
 Parts/Units which should be removed before removing "Paper Guide,
Front"/"Roller EJ Assy."
Paper Support Assy./Preview Monitor Unit/Housing, Upper/Housing, Middle/
Main Board Unit/ASF Assy./Holder, Shaft Assy./APG Assy./Print Head/
Carriage Unit/Printer Mechanism/CDR Guide Assy.
 Procedure for Removing
1. Release the hook of "Link EJ, Right" from the groove of "Guide, Shaft, Frame
EJ, Right". Then, remove "Link EJ, Right".
2. Remove the flat washer which secures the right side of "Frame EJ Assy.".
3. Remove "PF Timing Belt" from "Spur Gear, 37.242", then remove "Spur
Gear, 41.48".
4. Remove "Compression Spring, 1.27" and "Holder, Idle Roller" together with
"PF Timing Belt".
5. Move back "Carriage Unit" to the home position, and then remove "Frame EJ
Assy." in the direction of the arrow, also in the order indicated in the figure.
6. Remove the flat washer which secures "Link EJ, Left", then Slide "Link EJ,
Left" to the right.
7. Remove "Extension Spring, Push Up, Plate, Left" from the hooks of "Guide,
Shaft, Frame EJ, Left" and "Frame, Main".
8. Release the hooks (Left x3, right x2) which secure "Guide, Shaft, Frame EJ,
Left (Right)". Then, remove "Guide, Shaft, Frame EJ, Left (Right)".
Compression
Spring, 1.27
Holder, Idle Roller
Spur Gear, 41.48
PF Timing BeltSpur Gear,37.242
Link EJ, Right
Flat Washer
Guide, Shaft, Frame EJ, Right
Hook
12
Frame EJ Assy.
Hooks
Hook
Extension Spring,
Push Up, Plate, Left
Guide, Shaft,
Frame EJ, Left
Hooks
Link EJ, Left
Flat Washer
C A U T I O N
When removing "Frame EJ Assy.", take care not to damage or
transform "Star Wheels" of "Frame EJ Assy.".