Epson Stylus Photo R340 - Page 119

EPSON Stylus Photo R340/350 Revision A
Maintenance Overview 119
<Lubrication Point>
Contact point between the Right
EJ Frame Shaft Guide and the
Front Paper Guide
<Lubrication Type>
G-26
<Lubrication Amount>
1mm x 5mm
<Remarks>
Use a cotton-tipped swab to apply
it
<Lubrication Point>
Inside surface of Bushing 5
(EJ Roller Assy.)
<Lubrication Type>
G-26
<Lubrication Amount>
Adequate dose
<Remarks>
Use a cotton-tipped swab to apply
it
Right EJ Frame Shaft Guide
Lubrication Point
Lubrication Point
Right Bushing 5
Left Bushing 5
<Lubrication Point>
1. Contact point between the PF
Grounding Spring and the PF
Roller Assy.
2. Surface of contact point
between the PF Roller Assy.
and the Rear Paper Guide
<Lubrication Type>
1. G-26
2. G-26
<Lubrication Amount>
1. 1mm x Half periphery of
“Roller, PF Assy.”
2. 1mm x 4mm x 2 points
<Remarks>
Use a syringe with a metallic
needle to apply it.
<Lubrication Point>
1. Upper surface of curving area
of the Idle Roller Holder
2. Lower surface of curving area
of the Idle Roller Holder
<Lubrication Type>
1. G-26
2. G-26
<Lubrication Amount>
1. 2 points (Adequate dose)
2. 2 points (Adequate dose)
<Remarks>
Use a brush to apply it
Rear Paper Guide
PF Roller Assy.
PF Grounding Spring
Lubrication
Point 1
Lubrication
Point 2
Lubrication
Point 1
Lubrication
Point 2