Other Creative Printing Options 15
English
4. Insert the CD/DVD tray gently along the base of
the front tray until the marks on the CD/DVD tray
and the front tray match each other. Make sure
that either edge of the CD/DVD tray is inserted
into the brackets on the front tray.
c Caution
Do not insert the CD/DVD tray while the printer is operating.
Otherwise, your printer may be damaged or the surface of the
CD/DVD may become dirty of scratched.
Making the settings and printing
1. Press the CD/DVD [Print CD/DVD] button.
2. When you see this screen, press the OK button.
3. Press the x [Print Settings] button to open the
menu. Make the Layout setting and press the OK
button.
You can select the following layout options when
printing on a CD/DVD.
Note:
If you want to check the print output first, select Plain Paper
as the Paper Type setting and load plain paper.
4. Press the l or r button to select the photos you
want to print.
Note:
❏ You can switch the view of photos by pressing the
G [Display/Crop] button (see page 13).
❏ When you press the G [Display/Crop] button once, you
see a yellow frame. You can use this to crop out the rest of
the photo and print just the main subject. See “Cropping and
Sizing Your Photos” on page 21.
5. Press the Copies + button to specify the number
of copies for each photo if you selected the 4-up,
8-up, or 12-up option for the Layout setting.
Note:
❏ To select more than one photo, repeat steps 4 and 5 to
select other photos and the number of times to print them.
❏ When selecting photos for the 4-up, 8-up, or 12-up layout
setting, you can select a number of photos less than the
total. Unused areas of the layout will be left blank.
❏ You can confirm the print settings by pressing the OK
button.
6. Adjust the printing area (inside and outside
diameter) if needed. For details, see the following
section.
7. Press the
x Start button to print.
Note:
❏ We recommend that you print a test of the layout on a test
CD/DVD, before printing on a real CD/DVD.
❏ Allow CDs and DVDs to dry for 24 hours.
❏ If necessary, you can adjust the print position. See “If the printing
is misaligned” on page 16 for details.
❏ If an error message appears on the LCD screen, follow the
instructions on the LCD screen to clear the error.
Adjusting the printing area
Follow the steps below to adjust the diameter of the
printing area on a CD/DVD.
1. Press the x [Print Settings] button.
2. Press the u or d button to highlight CD
Inner-Outer, then press the r button.
1-up One photo will be printed on the
CD/DVD, centered on the hole in the
middle of the disc.
4-up Four photos will be printed on the
CD/DVD, with one photo in each of
the four quarters.
8-up 8 photos will be printed on the
CD/DVD, arranged in a circle around
the outer edge of the disc.
12-up 12 photos will be printed on the
CD/DVD, arranged in a circle around
the outer edge of the disc.
To Next Page
Loading...
