Other Creative Printing Options 17
English
Replay Movie and Print a Shot
You can replay the movie that you took with the digital
camera and select a scene to print.
Note:
Because the number of pixels for a movie is lower than for a photo
you may not get the expected printout quality. The number of pixels
depends on the digital camera model and the setting.
1. Press the s [Memory Card] button.
2. Press the l or r button to highlight Play Movie
and Print Photos on the first screen, and then
press the OK button.
3. Press the r button to select the Print Method
setting at the top of the screen. Use the u or d
button to select Print 1 frame or Print N frames
Then press the OK button.
4. Press the OK button.
5. Press the l or r button to select the movie to play,
and then press the OK button. Your printer shows
the movie on the memory card.
Note:
Depending on the movie data and the transfer rate of your
memory card or storage device, your printer may not play the
movie smoothly.
6. Do one of the following:
When selecting Print 1 frame as the print
method:
When you see the scene that you want to print,
press the OK button.
When selecting Print N frames as the print
method:
When you see the first scene in the range that you
want to print, press the OK button. Then when you
see the last scene in range, press the OK button
again.
Note:
Use the following button when viewing the movie.
❏ Press the l or r button to rewind or fast-forward the movie.
❏ Press the u or d button to pause or restart the movie.
❏ Press the G [Display/Crop] button to display the chapter
list of the movie.
7. Press the Copies + or - button to choose the
number of copies for that photo (up to 99).
8. Make the paper settings. For details, see “Making
the Paper and Layout Settings” on page 19.
Note:
❏ Make sure the Movie Enhance setting is set to On.
❏ You can confirm the print settings by pressing the OK
button.
9. Press the x Start button to print.
Note:
Depending on the movie data and the timing when you stop the
movie, you may not get the expected printout.
Printing on Stickers
You can print stickers on Photo Stickers.
1. Load EPSON Photo Stickers paper.
2. Press the s [Memory Card] button.
3. Press the l or r button to highlight View and Print
on the first screen, then press the OK button.
4. Press the x [Print Settings] button.
5. Select PhotoSticker16 as the Paper Type setting.
6. Press the OK button.
7. Press the l or r button to select the photos you
want to print.
Note:
❏ You can switch the view of photos by pressing the
G [Display/Crop] button (see page 13).
Print 1 frame Prints one scene that you select as
one shot.
Print N frames Divides the range of the movie that
you select into 12 frames and
prints 12 thumbnail images on one
sheet.
To Next Page
Loading...
