Epson Stylus Photo R360 Series - Adding the Date; Printing Photos in Black and White or Sepia; Fit Frame

22 Photo Printing Options
2. Press the G [Display/Crop] button to crop a
photo. You will see a yellow frame around the
cropped area.
3. Use the following button to set the area you want
to crop.
■ Press the Copies + or - button to change the
frame size.
■ Press the r, l, u or d button to move the
frame.
■ Press the x [Print Settings] button to rotate
the frame.
4. Press the OK button to confirm the cropped image.
Note:
This setting remains in effect until you print or press the
y Stop/Clear button.
5. After checking the cropped image, press the OK
button.
6. If you do not need to change any other settings,
press the x Start button to print.
Adding the Date
You can print the date the photo was originally taken
on the bottom right of your print.
1. Press the x [Print Settings] button.
2. Press the u or d button to highlight Date, then
press the r button.
3. Press the u or d button to choose a setting:
4. Press the OK button.
When Date is turned on, the information is printed on
all photos in any layout for which the information is
allowed.
Note:
These settings are saved when you turn off the printer or choose a
different set of photos, so remember to change the settings back to
None when you are done.
Printing Photos in Black and
White or Sepia
You can print your photo in black and white or in a
sepia tone without changing the original photo.
Note:
A sepia print has a brownish tone, for an old-fashioned photo look.
1. Press the x [Print Settings] button.
2. Press the u or d button to highlight Filter, then
press the r button.
3. Press the u or d button to choose the B&W or
Sepia, then press the OK button.
Fit Frame
This setting automatically trims the parts of an image
that extend beyond the margins of the selected print
size. Either the top and bottom areas or the left and
right areas of the image will be trimmed, depending
on the aspect ratio of the original photo and the
selected print size. The default setting is On.
Resize each photo (without trimming it) so that it fits
inside the print area specified on the Layout menu.
Margins may appear at the left and right of the photo,
depending on the print size and aspect ratio.
None (default, turns off the date stamp)
yyyy.mm.dd (2006.09.01)
mmm.dd.yyyy (Sep.01.2006)
dd.mmm.yyyy (01.Sep.2006)
On Trims the image.
None Does not trim the image.