EPSON Stylus Photo RX585/RX595/RX610 Revision B
Troubleshooting Troubleshooting When There is Error Display 45
Backup error
(connecting to PC)
Disconnect from PC before backing up files. Backup was attempted with the PC left connected. Disconnect the PC
Backup error
(File name and Folder levels
Error)
Backup canceled. File name is too long or there are too many
folder levels
The file name is too long, or the source has eight or more
levels in folder hierarchy.
Check the file name and the folder
hierarchy.
Backup error
(File name is too long)
Backup canceled. File name is too long or there are too many
folder levels
The file name is too long, or the source has eight or more
levels in folder hierarchy.
Check the file name and the folder
hierarchy.
File clearness
(error has occurred)
An error occurred while deleting files. Operation canceled. An error occurred during file deletion. –
File clearness
(memory card has removed)
The memory card or disk was removed. Operation canceled. The memory card was removed during file deletion. –
File clearness
(write-protected)
The memory card or disk is write-protected. Operation canceled.
Because the memory card is write-protected, it is not
possible to delete the file.
Cancel Write-Protect.
File clearness
(no memory card)
No memory card in slot. Operation canceled.
Because the memory card was not inserted, it was not
possible to delete the file.
Insert the memory card.
In adjustment of borderless
expansion value
You can change the amount of image expansion, but a white
border may appear around your photo.
This message is always displayed during adjustment of the
Borderless Expansion Value.
Accept it.
Zoom
If you change the paper size, the crop area may change. Do you
want to continue?
Warning for changing the paper size. Continue or cancel
Position of CD/DVD guide
(Re-set)
The CD/DVD guide is in the CD/DVD position. Close the CD/
DVD guide.
The CD-R Guide is in the extended position.
Return the CD-R Guide into the
withdrawn position.
CD/DVD guide close error
The CD/DVD guide is closed. Open the CD/DVD guide, then
press the Start button.
CD/DVD tray is not set correctly. Set CD/DVD tray correctly.
Table 3-2. Warning List (continued)
Warning Name Displayed Message Occurrence Condition Recovery Procedure