Epson Stylus Photo RX585 - 4.2.5 Middle Housing Assy

EPSON Stylus Photo RX585/RX595/RX610 Revision B
Disassembly and Assembly Removal of Exterior Parts 70
4.2.5 Middle Housing Assy
1. Remove the Panel Assy (p.63)
2. Remove the Scanner Unit (p.65)
3. Remove the Main Board Assy / Case Open Sensor (p.66)
4. Remove the Waste Ink Tray Assy (p.69)
5. Remove the screw and remove the Hinge Assy (left and right).
6. Remove the screws (3 in the front and 2 in the rear) securing the Middle Housing
Assy.
7. Remove the Middle Housing Assy with care not to get any cable caught.
(Continued to next page)
Figure 4-25. Removing the Hinge Assy
Figure 4-26. Removing the Middle Housing Assy
C A U T I O N
After removing the Waste Ink Assy, take due care not to stain any
surrounding objects with waste ink.
Hinge Assy B (Long): Left side
Hinge Assy B (Short): Right side
C.B.P-TITE 3x10 (x2)
Torque : 0.6±0.1N
·m
4
5
C.B.P-TITE 3x10 (x5)
Torque : 0.6±0.1N
·m
2
1
3