Epson Stylus Photo RX585 - 4.4.3 Stacker Assy

EPSON Stylus Photo RX585/RX595/RX610 Revision B
Disassembly and Assembly Disassembly of Housing Lower Assy 81
4.4.3 Stacker Assy
1. Remove the Printer Mechanism (p.76)
2. Push the CD-R Guide Lever to raise the CD-R Guide.
3. Release the hook, and remove the CD-R Guide Lever. (Fig. 4-49)
4. Lower the CD-R Guide, slide the shaft side of the CD-R Guide Lever Spring,
release its hook side end, and remove the spring. (Fig. 4-50)
5. Remove the screws (x4) securing the Stacker Assy. (Fig. 4-51)
6. Holding the right and left Stacker Guide areas, remove the Stacker Assy from the
Housing Lower.
7. Release the hook, and remove the gear from the CD-R Shaft. (Both right and left)
8. Remove the CD-R Shaft from the Stacker.
(Continued to next page)
Figure 4-49. Removing the CD-R Guide Lever
Figure 4-50. Removing the CD-R Guide Lever Spring
Figure 4-51. Removing the Stacker Assy
Figure 4-52. Removing the Gear and the CD-R Shaft
CD-R Guide Lever
Hook
Lower the lever
CD-R Guide Lever Spring
Left Stacker
Guide
C.B.P-TITE 3x8 (x4)
Torque : 0.6±0.1N
·m
1
2
3
4
Stacker
Right Stacker
Guide
Hook
Gear
CD-R Shaft