EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Disassembly and Assembly Main Unit Removal 44
Pay attention when handling the connector while installing the
middle housing.
After installing the Middle Housing, remove the Tube Cover
once and make certain that the tube is inserted into the Porous
Pad properly.
1. Remove the one screw securing the Tube Cover and remove the
Tube Cover.
2. Check that the tube is inserted into the Porous Pad properly.
Tube Cover
Tube
Porous Pad
C.B.P Tite 3X8,F/ZN
Tightening torque:0.6 ± 0.1 N
⋅m
To Next Page
Loading...
