Epson Stylus Photo RX600 - Selecting Your Paper Type

EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Disassembly and Assembly Disassembly and Assembly of Printer Unit 55
4.5.4 ASF Unit Removal
1. Middle Housing Removal. (p43)
2. Remove three screws that secure the ASF unit.
3. Remove the ASF unit from the main frame upward.
Figure 4-13. ASF Unit Removal
C A U T I O N
 Do not touch the LD Pad or Hopper Pad of the ASF Unit.
 Do not reuse any scratched pad.
 When securing the ASF unit to the main frame, pay attention to
the installed location of the LD roller cover.
 Lubrication required. For lubrication, refer to the following
section.
6.3.3 Lubrication Points of the Printer (p83)
ASF Unit
C.B.S 3x6,F/ZN
Tightening torque
:0.8 ± 0.1 N
⋅m
C.B.P Tite 3x8,F/ZN
Tightening torque
:0.6 ± 0.1 N
⋅m
C.B.S TITE (P4) R 3x6,F/ZN
Tightening torque:0.8 ± 0.1 N
⋅m