Epson Stylus Photo RX600 - Scanning to a Computer; Using Epson Smart Panel

EPSON Stylus PHOTO RX600/610, RX620/630 Revision C
Disassembly and Assembly Disassembly and Assembly of Printer Unit 57
4.5.6 Power Unit
1. Middle Housing Removal. (p43)
2. ASF Unit Removal. (p55)
3. Disconnect both power units and the TPU holder assembly lead from the FFC
holder on the left side of the printer.
4. Remove a screw on back of the printer, and remove the TPU holder assembly from
the power supply unit.
5. Remove two screws on back of the printer supply unit, and remove the power
supply unit from the main frame.
Figure 4-16. Power Unit Removal
A D J U S T M E N T
R E Q U I R E D
After replacing the power supply unit, make adjustments referring
to the following:
 Adjustment Items for Individual Units and Components (p65)
C.B.P Tite 3x8,F/ZN
Tightening torque:0.6 ± 0.1 N
⋅m
TPU Holder Assembly
C.B.P Tite 3x8,F/ZN
Tightening torque
:0.6 ± 0.1 N
⋅m
Power Unit
C.B.S Tite R 3x6,F/ZN
Tightening torque
:0.8 ± 0.1 N
⋅m