134 Maintaining the RX600
3. Open the ink cartridge cover holder by pulling the back up and toward you.
Caution:
Never attempt to open the cartridge holder’s cover while the print head is moving.
Wait until the cartridges have moved to the replacement position.
4. Identify the cartridge you need to replace. Press in the tab at the back of the
cartridge to release it, then lift the cartridge straight out. Dispose of it
carefully.
Note:
The illustration above shows the black cartridge being removed. Only remove the
cartridge(s) you need to replace.
5. Unwrap the new cartridge.
Open the cover
from the back
sprx600usersguide.book Page 134 Wednesday, February 25, 2004 1:47 PM
To Next Page
Loading...
