18 Loading Paper
3. Load up to 10 envelopes at a time—short edge first, flap edge left, and
printable side up. Place them against the right edge of the sheet feeder, behind
the tab.
Note:
Do not place the envelopes in front of the feeder guard.
4. Press the sides of the left edge guide together and slide it against the envelopes
(but not too tightly).
Note:
For best results, press each envelope flat before loading, or load one envelope at a
time. Avoid envelopes that are too thin; they may curl during printing.
Select the following settings when printing on envelopes:
■ Plain paper as the Type (Windows
®
) or Media Type (Macintosh
®
) setting
■ The correct envelope size as the Size (Windows) or Paper Size (Macintosh)
setting
■ Landscape as the Orientation setting
For instructions on selecting these settings, see:
■ “Printing in Windows” on page 36
■ “Printing on a Macintosh” on page 43
Load envelopes
short edge first,
printable side up,
and flap edge left
sprx600usersguide.book Page 18 Wednesday, February 25, 2004 1:47 PM
To Next Page
Loading...
