Epson Stylus Photo RX600 - Page 34

34 Copying
You should see your EPSON Stylus Photo RX600 as the input and output
device.
5. Click
Settings to change the displayed print settings (such as a different
Media Type [paper] setting, if you loaded special paper) or select additional
options.
6. Click the
Image Adjust button to enhance your image or add effects:
You can adjust the following settings:
■ Enable or disable the automatic document enhancement feature. (This
feature automatically enhances the image color and appearance in your
copies.)
Note:
Disabling the automatic document enhancement feature may cause a gray or light
colored background to appear on your copies.
■
Add a sepia, blue, or black and white filter
■ Adjust brightness, contrast, or saturation levels
7. Click the
Copy button to start copying.
Note:
Never open the scanner lid while copying, or your copies may not look right.
If you need to stop a copy job in progress, click the Stop button.
Note:
For more information on Smart Panel copy settings, see the on-screen Smart Panel
User Guide or click ? on the main Smart Panel window.
Click here
sprx600usersguide.book Page 34 Wednesday, February 25, 2004 1:47 PM