Epson Stylus Photo RX600 - Scanning Your Image

Scanning From a Program 63
3. Close the scanner lid.
Note:
If you place your photo or document against the edge of the glass, the edges of
your photo or document may not be copied.
To copy a thick document, you can remove the scanner lid. Turn off
the RX600 and open the scanner lid completely. Disconnect the
cord from the TPU connector and pull the lid straight up. Turn on
the RX600 and gently press down the original to keep it flat on the
glass as you copy. When you’re finished, turn off the RX600
before replacing the scanner lid and plugging in the connector.
Scanning Your Image
1. Start your scanning program.
2. Open the File menu and choose
Import or Acquire, then select EPSON
Stylus Photo RX600
.
Click to start
Epson Scan
sprx600usersguide.book Page 63 Wednesday, February 25, 2004 1:47 PM