EPSON Stylus PHOTO RX640/650 Revision A
Disassembly and Assembly Removal of Exterior Parts 48
4.2.5 Middle Housing
1. Remove the Panel Assy. (p. 43)
2. Remove the Scanner Unit. (p. 45)
3. Remove the Main Board. (p. 46)
4. Remove the Stacker Cover from the right and left supports. (Fig. 4-18)
5. Remove the screws (x2) securing the Waste Ink Assy.
(Do not remove the tube) (Fig. 4-19)
6. Remove the screw and remove the Hinge Assy (left and right). (Fig. 4-19)
7. Remove the screws (3 in the front and 2 in the rear) securing the Middle Housing
Assy. (Fig. 4-20)
8. Remove the Middle Housing Assy, taking care not to damage any cables or the
Waste Ink Assy.
(éüÇÃÉyÅ[ÉWÇ÷ë±Ç¦)
Figure 4-18. Removing the Stacker Cover
Figure 4-19. Removing the Waste Ink Assy and the Hinge Assy
Figure 4-20. Removing the Middle Housing Assy
C A U T I O N
After removing the Waste Ink Assy, take due care not to stain any
surrounding objects with waste ink.
Stacker Cover
Waste Ink Assy
Hinge Assy (x2)
C.B.P-TITE 3x8 (x2)
Torque : 0.6±0.1N
·m
C.B.P-TITE 3x10 (x2)
Torque : 0.6±0.1N
·m
1 2
3
5
4
C.B.P-TITE 3x10 (x5)
Torque : 0.6±0.1N
·m
To Next Page
Loading...