52 Printing on CDs and DVDs
Printing Your Design
After you have created your design and loaded a CD or DVD, you’re ready to
print.
1. Open the File menu and select
Print.
2. Make sure
Stylus Photo RX700 is selected, then click Print.
3. When printing is complete, pull the tray out of the printer and let the disk dry
fully before handling it.
If you want to check the print position or color, see the instructions for “Adjusting
the Print Position” below and “Adjusting the Print Density” on page 54.
Adjusting the Print Position
If your printed images and text are not centered or positioned the way you want,
you may need to adjust the printing position. Use the blank cardboard check disk
included with your RX700 or an extra CD.
1. Place the check disk (or an extra CD) on the CD tray and insert it into the
printer, as described on page 48.
2. Start EPSON Print CD.
3. Select
Print from the File menu.
4. Make sure
Stylus Photo R700 is selected, then click Print Position
Confirmation Pattern
(Windows) or Print Position Check Pattern
(Macintosh).
Macintosh
Windows
To Next Page
Loading...
