Using EPSON Print CD 53
5. Click
Print. The confirmation pattern is printed on
the position check disk or CD.
6. Remove the position check disk or CD and measure
the distance from the edge of the hole to the small
cross marks (distances labeled A and B as shown).
You’ll need a metric ruler with millimeters for these
measurements.
7. Open the File menu and select
Adjust Print Position. You see a screen like
this:
8. Make sure
Enter Values (Windows) or Value Entry (Macintosh) is checked.
Input the A distance in the
Height (Top) or Top Space box. Enter the B
distance in the
Width (Right) or Right Space box.
9. Click
OK to save the measurements.
Enter measurements here
Macintosh
Windows
Enter measurements here
To Next Page
Loading...
