Epson Stylus Photo RX700 - 4.4 Disassembly and Assembly of Major Parts of Printer

EPSON Stylus Photo RX900 Revision A
Disassembly and Assembly Disassembly and Assembly of Major Parts of Printer 102
4.4 Disassembly and Assembly of Major Parts of Printer
The flowchart below shows step-by-step disassembly procedure for the printer. When disassembling each component, refer to the page shown in the chart below.
Flowchart 4-3. Removing the Major Parts of the Printer
ASF Rear Assy
(p.103)
I/C Holder Assy
(p.105)
Printer Mechanism
(p.107)
Removal of Exterior Parts
(p.80)
APG Assy
(p.111)
Valve Assy (Including Ink Tube Assy)
(p.94)
Waste Ink Pads (Lower Case)
(p.110)
CR Motor
(p.115)
PE Sensor Assy
(p.122)
Carriage Assy
(p.116)
Rear Paper Guide Assy
(p.114)
Power Supply Board
(p.109)
PF Motor
(p.125)
Release Assy
(p.121)
Upper Paper Guides
(p.123)
Idle Roller Shaft Assy
(p.124)
PF Roller Assy & PF Encoder Assy
(p.126)
Waste Ink Pads (I/C Holder Assy)
(p.106)
Waste Ink Pads (Platen Area)
(p.120)
Paper Guide Front Assy (Platen)
(p.119)
CD-R Guide Assy
(p.127)
EJ Frame Assy
(p.130)
ASF Pick Up Shaft Assy
(p.132)
Ink System Assy
(p.112)
ASF Drive Assy
(p.113)