Epson Stylus Photo RX700 - Waste Ink Pads (Lower Case)

EPSON Stylus Photo RX900 Revision A
Disassembly and Assembly Disassembly and Assembly of Major Parts of Printer 110
4.4.6 Waste Ink Pads (Lower Case)
1. Remove the Printer Mechanism. (p.107)
2. Remove the Power Supply Board. (p.109)
3. Remove the Waste Ink Cover.
4. Remove all the Waste Ink Pads.
Figure 4-44. Removing the Waste Ink Pads
C A U T I O N
Take due care not to stain any surrounding objects with waste ink.
Before installing the Waste Ink Pads, make certain that the Waste
Ink Tubes have been install in the proper locations, respectively.
A D J U S T M E N T
R E Q U I R E D
On the occasion of replacing the Waste Ink Pads with new ones as
required by a maintenance error, replace all the specified parts
with new ones and clear the counter value.
 6.1.1 Maintenance Error (p.147)
Waste Ink Tube
Waste Ink Cover
Waste Ink Pads (Lower Case)
Waste Ink Pads (I/C Holder)
Waste Ink Pads (I/C Holder)
Lower Case Assy