Epson Stylus Photo RX700 - Page 84

EPSON Stylus Photo RX900 Revision A
Disassembly and Assembly Removal of Exterior Parts 84
Figure 4-6. Placing the Scanner Unit FFCs
 Locate the FFCs (x2) of the Scanner Unit as shown at right in
the Middle Housing so that the Scanner Unit can be opened
smoothly without folding the FFCs.
 Install the ferrite cores (x2) and the FFC Clamp at the locations
shown below:
A D J U S T M E N T
R E Q U I R E D
Refer to the following section and perform the necessary
adjustments.
 5.1.1 Adjustment Items (p.134)
FFC Clamp
Ferrite Core
Tape
Ferrite Core