Epson Stylus Photo RX700 - 4.3 Disassembly of Scanner Unit

EPSON Stylus Photo RX900 Revision A
Disassembly and Assembly Disassembly of Scanner Unit 96
4.3 Disassembly of Scanner Unit
4.3.1 Disassembly Procedure for Scanner Unit
Flowchart 4-2. Disassembly Procedure for Scanner Unit
C A U T I O N
 Once the Scanner Housing is removed, there is a possibility that
dust and dirt may enter the inside of the scanner body. Perform
disassembly and assembly of the Scanner Unit in an
environment that minimizes intrusion of dust and dirt.
Disassembly and assembly on a clean bench is ideal.
 Perform disassembly and assembly with care not to damage the
document table (glass). In addition, never forget that a very
troublesome cleaning is required if dirt sticks to the inside of
the document table.
A D J U S T M E N T
R E Q U I R E D
When the Scanner Housing is removed, make the following
adjustment after reinstallation.
 5.4 Scanner Home Position Adjustment (p.142)
HP Board
(p.98)
CR Motor Unit
(p.99)
Scanner Housing
(p.97)
Scanner Unit
(p.83)
Disassembly of TPU Assy
(p.101)
Carriage Cover Assy
(p.98)
After reinstallation or replacement of
any of the following parts, make “5.4
Scanner Home Position Adjustment
(p.142)”.
CCD Unit (Carriage Unit Assy)
(p.100)