Loading Envelopes
When printing on envelopes, please note the following:
q You can load up to 10 envelopes into the sheet feeder.
q Load envelopes flap edge first with the flap side down, as
shown below.
q Do not use envelopes that are curled or folded. Also avoid
using envelopes that are too thin; they may curl during
printing.
q Select Plain Paper as the Media Type setting in the printer
driver. For more details on making printer driver settings,
see online help for Windows, or Chapter 6 for Macintosh.
q Set the adjust lever to the ’’+’’ position before printing on
envelopes. To change the setting, open the printer cover
and reposition the lever. See the illustration on page 6-6.
Note:
Return the adjust lever to the ‘‘0’’ position, which is the normal
position, after you finish printing on envelopes. Leaving the lever
in the ‘‘+’’ position may cause the printed image to have gaps on
other media.
C-22
6
R
EPSON Stylus Photo
User’s Guide
A5 size Chapter 6
01-14-97
Printing on Special Paper 6-7
To Next Page
Loading...
