Loading Transparencies
When printing on transparencies, please note the following:
q Before loading transparencies, remove the paper support
and reinstall it into the slots at the back of the printer as
shown below.
q Always put a support sheet or a sheet of plain paper under
the stack of transparencies.
q You can load up to 10 transparencies.
q Make sure the printable surface of the paper is face up
when loading transparencies into the sheet feeder. See the
illustration on page 6-4.
q Select Ink Jet Transparencies as the Media Type setting in
the printer driver. For more details on making printer
driver settings, see online help for Windows, or Chapter 5
for Macintosh.
C-2324
L EPSON Stylus Photo
User’s Guide
A5 size Chapter 6
01-14-97
6-8 Printing on Special Paper
To Next Page
Loading...
