Epson Stylus Photo - Safety Approvals

Hardware initialization
When the printer is turned on, the printer mechanism is initialized and the
input data buffer and print buffer are cleared. Printer settings are returned
to their default values. However, the printer mechanism is not initialized
if the printer is turned on within ten seconds after turning it off. In this
case, the printer caps the print head, and ejects any paper in the paper
path.
Software initialization
Clears the print buffer and returns printer settings to their default values.
However, software initialization does not initialize the printer mechanism
or clear the data buffer.
Safety approvals
Safety standards:
U.S. model UL 1950 with D3, CSA C22.2 No.950 with
D3
European model EN60950 (VDE and NEMKO)
EMC:
U.S. model FCC part 15 subpart B class B
CSA C108.8 class B
European model EN 55022 (CISPR Pub. 22) class B
EN 61000-3-2
EN 61000-3-3
EN 50082-1
IEC801-2
IEC801-3
IEC801-4
Australian model AS/NZS 3548 class B
B
R
EPSON Stylus Photo
User’s Guide
A5 size Appendix b
12-27-96
Specifications B-9