Serial interface
The printer’s built-in serial interface is based on the RS-423 standard. This
interface has the following characteristics:
Standard: Based on RS-423
Synchronization: Synchronous
Bit rate: Approx. 900K bps
Handshaking: X-ON/X-OFF DTR protocol
Word format:
Data bit 8 bits
Parity bit None
Start bit 1 bit
Stop bit 1 bit
Connector: 8-pin mini-circular connector
Recommended cable: Apple System Peripheral-8 cable
(Part number M0197)
B
R
EPSON Stylus Photo
User’s Guide
A5 size Appendix b
12-27-96
Specifications B-11
To Next Page
Loading...
