Epson Stylus Photo - System Requirements

System Requirements
When using your printer with a PC
To use your printer, you need Microsoft Windows 3.1,
Windows for Workgroups, or Windows 95; and a shielded,
twisted-pair parallel cable.
To install and use the printer software (printer driver and
utilities) included on the CD-ROM or floppy disk packed with
your printer, the following is required:
Minimum system Recommended system
80386/25 MHz processor Pentium or higher processor
16MB RAM 32MB RAM or more
20MB hard disk space 50MB or more free hard disk space
VGA monitor VGA or better monitor
If you decide to use the EPSON Answers online guide included
with your printer software, your system should also meet the
following requirements:
q At least 20MB of free disk space for full program installation
q Double-speed CD-ROM drive (Quad-speed or faster
recommended)
For more details on EPSON Answers, see your CD-ROM
booklet.
Your computer dealer can help you update your system if it
does not meet these requirements.
L EPSON Stylus Photo
User’s Guide
A5 size Chapter 1
01-14-97
1-4 Getting to Know Your Printer