Installing the software for Windows 3.1
Follow these steps to install the software using Windows 3.1:
1. Make sure Windows 3.1 is running and the Program Manager
window is open.
2. Insert the EPSON printer software CD shipped with your
printer in the CD-ROM drive. (If you use the floppy disk
version, insert it in a disk drive.)
3. From the File menu, choose Run. You see the Run dialog box.
In the Command Line box, type D:\SETUP (If your
CD-ROM drive has a drive letter other than ‘‘D’’ or you are
using the floppy version, substitute the appropriate letter.)
Note:
If you wish to make a floppy disk version of the essential printer
software (printer driver, utilities, and online help) on your
CD-ROM, type EPSETUP instead of SETUP. In the dialog box
that appears, click the Driver disk creation utility button and
follow the on-screen instructions.
3101
L EPSON Stylus Photo
User’s Guide
A5 size Chapter 2
12-28-96
2-18 Getting Started
To Next Page
Loading...
