Epson Stylus Pro 10000 - Page 134

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 127
5. Remove one white screw securing the AC inlet.
Figure 4-27.
6. Remove six white screws (CBS: M4x8) securing the cover lower part, then
remove eight white screws (CBS: M4x8) securing the cover upper part.
Figure 4-28.
7. Lift up the Rear Cover upper part, then remove it.
Screw
AC inlet
C A U T I O N
The Rear Cover is large and difficult to handle, so use caution to
avoid injury during handling.
Screws Screws
Screws Screws
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com