Epson Stylus Pro 10000 - Page 139

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 132
4. Remove the FFC from rear side.
5. Remove five screws (CS: M4x8) securing the Paper Guide U from rear side.
Figure 4-38.
6. Push the Paper Release Lever to the front. (Activates paper hold condition.)
Figure 4-39.
7. Remove the Paper Guide U by pulling upward.
Screws
Screws
Paper release lever
Paper guide U
C A U T I O N
When removing / installing the Paper Guide U, do not touch the
P_Rear Sensor.
Figure 4-40.
Paper guide U
P_REAR sensor
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com