Epson Stylus Pro 10000 - Page 156

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 149
18. Remove four screws (M4x8) securing each Suction Fan cover.
Figure 4-76.
19. Turning over and extract the Suction Fan. Then, take the cable connector out of the
clamp.
Figure 4-77.
20. Remove three screws (CP(W) M4x8), then remove the Suction Fan.
Figure 4-78.
Screws
Screws
Sction Fan Flame
Cable Clump
Cable Connector
Screws
Sction Fan
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com