Epson Stylus Pro 10000 - Page 195

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Adjustment Outline 188
NOTE: (*1) When it is possible to back up parameters from the C362DRV Board
before replacement, the parameters can be downloaded to the new
C362DRV Board and steps 4~9 and 13 will not be needed.
CR Motor
replacement
1
2
3
4
 CR timing belt tension adjustment
<Start-up the Self-diagnostics>
 Bi-d adjustment
 Head slant adjustment
 Clear the CR motor life counter.
5.3.1
5.4.4.10
5.4.4.7
5.4.4.8
5.4.4.9
Ch1-1.8
PF Motor
replacement
1
2
3
4
 PF timing belt tension adjustment
<Start-up the Self-diagnostics>
 Paper feed adjsutment
 Top & Bottom adjustment
 Clear the PF motor life counter.
5.3.2
5.4.4.12
5.4.4.13
Ch1-1.8
<Sensor ASSY
replacement 1>
 P_FRONT sensor
ASSY
 P_REAR sensor
ASSY
1
2
3
<Start-up the Self-diagnostics>
 Rear sensor volume adjustment
 Front sensor volume adjustment
 Top & Bottom adjustment
5.3.8.1
5.3.8.1
5.4.4.13
<Sensor ASSY
replacement 2>
 P_REAR sensor
ASSY
1
2
<Start-up the Self-diagnostics>
 Paper sensor adjustment
 Rear sensor position adjustment
5.3
5.4.4.14
<Sensor ASSY
replacement 3>
P_THICK sensor
ASSY
1
<Start-up the Self-diagnostics>
 From the "Test" menu select "Sensor" and
then check the "Paper Thickness"
Required tool: Paper thickness gauge
5.4.3.4
<Sensor ASSY
replacement 4>
CR_HP sensor
ASSY
1
<Start-up the Self-diagnostics>
 Capping position adjustment
5.3.6
<Sensor ASSY
replacement 5>
Cover sensor ASSY
1
<Start-up the Self-diagnostics>
 From the "Test" menu select "Sensor" and
then check the "Cover"
5.4.3.4
Table 5-1. Repair Items and Required Adjustment Items
Repair Item
Adjustment
Procedure
Adjustment Items Reference
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com