Epson Stylus Pro 10000 - Feed Adjustment

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 239
5.4.4.12 Feed adjustment
Perform the distance revision in the paper conveyance. Print the line pattern in
direction of paper feeding and input the distance in order to decide the PF encoder
resolution by firmware. Figure 5-65 showing adjustment menu sequence and Figure
5-66 showing print pattern.
Figure 5-65.
<Print pattern>
Adjustment item: Paper feed length
Printing method: Length 1000mm/ Two pass with Uni-D at 720dpi resolution for CR
and 360dpi for PF.
Figure 5-66.
Enter
Enter
Enter
Enter
[Enter] Adjust Print
Printing Pattern
V Length : +1000.000mm
Start the print with "Enter" key.
Printing Pattern
Press the [Pause] key to select
the [V Length] input menu.
Press the [Pause] key to select
the [Top & Bottom] menu.
Adjustable with "Paper Feed +/
-" key at unit of 0.001 mm.
Print END
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com