Epson Stylus Pro 10000 - Page 258

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 251
2. Head Rank
The panel input of 5.4.4.3 "Head Rank input" is possible implement about head rank
input.
Figure 5-86 showing the head rank input in the parameter update menu sequence.
Although entry is only the top menu, layer under is similar to 5.4.4.3 "Head Rank
input".
Figure 5-86.
3. Print position
Update the parameter of the Bi-D print position and the Gap position.
Figure 5-87 showing the print position menu sequence.
Item
Item
Item
SelecType
SelecType
SelecType
Enter
Rank Input :All
Rank Input : Dye stuff
Rank Input : Pigment
Input Head 1 Code
Pause
Item
Item
Item
Item
Item
Item
Item
Item
SelecType
BiD 240, V1, K 0
BiD 240, V1, C 0
BiD 240, V1, M 0
BiD 240, V1, LC 0
BiD 240, V1, LM 0
BiD 240, V1, Y 0
BiD 300, V2, K 0
12 3 4
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Adjustable with "Paper Feed +/
-" key at unit of 1/2880 inch.
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com