Epson Stylus Pro 10000 - Page 280

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Maintenance Maintenance inspection items 273

Are 2 waste ink tubes fixed to the tube clamp?
Figure 6-10.

Are there the damage and ink leakage of 2 waste ink tubes?
 Is there ink leakage (overflow) from the waste ink tank?
2.1 Dot missing detector / Cleaning unit : The carriage locking is canceled and the
carriage migrate to the left side, then confirm these units. Wipe the ink dirt. (Refer to
4.2.3.12)
 Is there ink dirt in the window and also periphery department of the dot missing
detector?
 Is there ink dirt in the bottom of the cleaning unit (the absorption material
attachment department)?
Figure 6-11.

Is not the piece of paper etc. adhering to the cap ink pad and also 3 caps (grey
rubber)?
Figure 6-12.

Is there the dirt of paper powder etc. in 3 sheets of vacuum cleaner heads of the
cleaning units?
*Wipe the dirt of the cleaning unit with the cloth that do not occur fuzz or paper.
2. Ink system device
Tube
Clamp
Cleaning unit
Dot missing detector
Cleaner head
Cap ink pad
Cap
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com