Epson Stylus Pro 10000 - Page 32

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description Interfaces 25
ECP MODE
Table 1-17. Transmission Specifications
Description
Transmission mode IEEE-1284 ECP mode
Synchronization Refer to IEEE-1284 specification
Handshaking Refer to IEEE-1284 specification
Signal level IEEE-1284 level 1 device
Adaptable connector See forward channel
Data trans. timing Refer to IEEE-1284 specification
Extensibility request
The printer responds affirmatively when the extensibility request values
are 10H or 14H:
10H: Request ECP Mode Reverse Channel Transfer
14H: Request Device ID;
Return Data Using ECP Mode Reverse Channel
Transfer
Device ID
The printer returns the following strings when the device ID is
requested:
<00H><4EH>
MFG: EPSON
CMD: ESCPL2, BDC
MDL: Stylus[SP]Pro[SP]7000
CLS: PRINTER
DES: EPSON[SP]Stylus[SP]Pro{SP]7000
Note: [00H] denotes a hexadecimal value of zero
MDL values depend on the EEPROM setting
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com