Epson Stylus Pro 10000 - Page 347

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Product Description 340
Counter initialize menu
This section explains the Counter Initialize Menu. The table below shows items that
are initialized from this menu.
Each Initialize item explained below.
 Initialize NVRAM, timer, life counter, mechanical counter
Selecting this mode allows the user to initialize the NVRAM, timer, life counter,
and mechanical counter.
 Initialize NVRAM
Selecting this mode allows the user to initialize the NVRAM.
 Initialize RTC
Selecting this mode allows the user to set RTC initialized time to NVRAM.
The panel display is following;
RTC INIT = <YY>/<MM>/<DD>/<HH>
NOTE: *<YY>: year, <MM>: month, <DD>: day, <HH>: hour
The cursor shifts "year → month → day → hour → year....." with Cleaning button.
Time is adjusted with Paper feed "+" or "-" button.
RTC initialized time is set to NVRAM with Enter button, and RTC is initialized.
NOTE: "RTC backup battery end" maintenance call is reset when RTC is
initialized.
 Initialize CR motor life
Selecting this mode allows the user to initialize the CR motor life counter.
 Initialize CR motor life total
Selecting this mode allows the user to initialize the CR motor life total counter.
 Initialize PF motor life
Selecting this mode allows the user to initialize the PF motor life counter.
 Initialize head unit life
Selecting this mode allows the user to initialize the head unit life counter.
 Initialize cleaning unit life
Selecting this mode allows the user to initialize the cleaning unit life counter.
 Initialize total prints
Selecting this mode allows the user to initialize the total printed page counter.
 Initialize waste ink capacity
Selecting this mode allows the user to initialize the waste ink capacity counter
(Protect counter A).
 Initialize FL BOX
Selecting this mode allows the user to initialize the FL BOX capacity counter
(Protect counter D). Provided that value of protect counter D will be added to
Protect counter A before initialization.
Table 8-26. Counter Initialize Menu
Item Panel display Setup Values
Initialize NVRAM, timer, life
counter, mechanical counter
INIT ALL
EXEC
Initialize NVRAM
INIT NVRAM
EXEC
Initialize RTC
RTINIT
<YY>/<MM>/<DD>/<HH>
Initialize total cutter life
INIT CUT TOTAL
EXEC
Initialize CR motor life
INIT CR MTR
EXEC
Initialize CR total motor life
INIT CR TOTAL
EXEC
Initialize PF motor life
INIT PF MTR
EXEC
Initialize head unit life
INIT HEAD
EXEC
Initialize cleaning unit life
INIT CLEANER
EXEC
Initialize total printed pages counter
INIT TTL PR
EXEC
Initialize waste ink capacity
INIT WAST INK
EXEC
Initialize FL Box
INIT FLBOX
EXEC
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com