Epson Stylus Pro 10000 - Page 374

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Stylus Pro 10600 Adjustment 367
Print position 2
Performs updating of parameters for Bi-D printing position alignment in PG medium.
Figure 8-13 showing the print position 2 menu sequence.
Figure 8-13. Update print position 2 parameter menu sequence
Item
Item
Item
Item
Item
Item
Item
Item
SelecType
BiD2 240, V1, K 0
BiD2 240, V1, C 0
BiD2 240, V1, M 0
BiD2 240, V1, LC 0
BiD2 240, V1, LM 0
BiD2 240, V1, Y 0
BiD2 V2, K 0
12 3 4
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
SelecType
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Item
SelecType
BiD2 V2, C 0
BiD2 V2, M 0
BiD2 V2, LC 0
BiD2 V2, LM 0
BiD2 V2, Y 0
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
Adjustable with "Paper Feed +/-"
button at unit of 1/2880 inch.
12 3 4
SelecType
SelecType
SelecType
SelecType
Item
Item
Item
Item
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com