EPSON Stylus Pro 10000/10000CF/10600 Revision D
Product Description Maintenance Mode 2 51
M/W7 balance
M/W 7 Balance is a mode for individual adjustment of the feeding amount for each
pass during printing and is available only when Mode C has been selected by "MW 7
Mode Selection" in Maintenance Mode 1. By making small adjustments to paper
feeding for each model, generation of banding from mechanical differences is kept to a
minimum.
FLBL DET setup
Sets whether or not a Maintenance Request (0100) will be generated when the Flushing
Box life value is reached. (Flushing quantity: 2kg.) In order to ensure adequate margin
for part life, the default setting is for not displaying a Maintenance Request.
ON: Maintenance Request is not generated (default)
OFF: Maintenance Request is generated
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com
To Next Page
Loading...
