Epson Stylus Pro 10000 - Page 74

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Operating Principles Printer Mechanism Components 67
Figure 2-11. Paper feed department 2/2

Shutter position
The shutter position is switched by the paper loading position as following;
 Shutter motor
The shutter motors are consist of three DC blowers. Their duty are switched by the
paper loading position and printing condition as following;
Sub platen
Suction fan
Shutter device
Table 2-3. Shutter
Shutter Paper position
Closed Start print - 40mm printing from top of form
Half open 40mm - 100mm printing length
Full open
100mm printing from top of form - Paper cutting, Paper initial
loading
Table 2-4. Shutter motor duty
Shutter motor duty Condition
0% Waiting condition without below conditions
50%
P_REAR sensor senses the paper at paper loading by P_FRONT
sensor sensing.
80% P_FRONT sensor senses the paper at paper loading by printing.
100% Paper initial loading, Printing , Paper cutting
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com