-120
Roll Paper Option
Note:
When Sheet is selected from the Paper Source list, the Roll Paper Settings
(Auto Rotate, Paper Width, Auto Cut, and Print Page Line) are not
available.
Auto Rotate
The Auto Rotate function is effective only when the print data
length is shorter than the printable width of the roll paper (300,
400, or 600 mm, 12, 14, 20, 22, 24, 36, or 44 inches). The print data
will automatically be turned 90 degrees to print crosswise, saving
roll paper. This function is not available when Roll Paper (Banner)
is selected from the Paper Source list.
Also, when you use this function, you can set the paper width.
To enable Auto Rotate, select the Auto Rotate check box in the
Roll Paper Settings box on the “Paper Menu”.
Original Auto Rotate onAuto Rotate off
To Next Page
Loading...
