-199
❏ Adjust the feed strength by pressing the Paper Feed
buttons on the control panel. When using thick, heavy, or
curled paper, press the Paper Feed (+) button to increase
the power. When using thin or light paper, press the Paper
Feed (-) button to decrease the power.
❏ If the paper does not come out even after executing the
procedure above, open the front cover and pull the paper
out manually.
7. Holding the bottom edge of the paper, turn the roll paper to
remove slack. Make sure that the bottom edge of the paper is
straight, and that it is aligned with the row of holes.
To Next Page
Loading...
