-244
7. Set the Manual switch on the Auto Take-up Reel Unit to the
Forward position, and take up at least one turn of paper on
the take-up reel core. Make sure that adequate slack remains
between the roll paper and the take-up reel core.
Winding paper backward
When you want the paper wound onto the take-up reel core with
the print on the inside, set the take-up reel unit to wind paper
backward. Follow the steps below.
1. Carry out the steps 1 through 3 described in “Winding paper
forward”.
2. Set the Auto switch on the control box to Off.
printer’s
front side
To Next Page
Loading...
